Structural Design

High-strength alloy steel structure, self-weight ≤280kg, adaptable to standard pallet sizes (1200×1000/1100×1100mm), compatible with European and national standard pallets.

Positioning Accuracy

Full stroke repeat positioning accuracy ±2mm, can be equipped with dual encoder closed-loop control to ensure high-frequency access stability.

Load Capacity

Dynamic load 1.5T (constant speed movement)/static load 2T, suitable for food, daily chemicals, 3C electronics and other standard pallet storage scenarios.

Telescopic Performance

Single-depth telescopic stroke 0.6-3m, three-section telescopic structure, contraction ratio 1:0.4, aisle width optimized to 1.5m (compatible with narrow aisle stacking machines).

Environmental Adaptability

Basic model -25℃~80℃ wide temperature operation, optional explosion-proof/corrosion-resistant version (ExdIIB T4/IP66), suitable for chemical and hazardous chemical warehouses.

Safety Protection

Dual safety mechanism: mechanical hard limit + electronic soft limit, automatic locking to prevent falling in case of sudden power failure.

Easy Maintenance

Key component quick-release design (guide wheel/drive sprocket replacement <15 minutes), standard remote diagnostic interface, fault location accuracy up to component level.

Energy Efficiency

Dual-mode power adjustment (conventional/energy-saving), single-cycle operation energy consumption ≤0.2kWh.

Case Studies

Fast-moving consumer goods regional distribution center (daily throughput 3000 pallets)

Lithium battery raw material warehouse (explosion-proof certification)

Warehouse Type

Recommended Configuration

Value Output

High-frequency warehouse for fast-moving consumer goods

Basic model + energy-saving mode

Annual electricity cost savings ¥62,000/10,000 operations

Explosion-proof warehouse for chemicals

Explosion-proof certified version + anti-corrosion coating

Reduce safety accident rate by 98%

Multi-story high-bay warehouse

Reinforced guide wheel group + dual encoder

Improve Z-axis synchronization accuracy by 40%

Delmeng standard single-deep fork provides a basic solution that combines efficiency and reliability for large-scale warehousing, especially suitable for customers pursuing long-term stable ROI.

Model

180*50

170*60

170*65

170*70

Non-standard customization

Load Capacity

<2000kg

Fork Length

600-3000mm

Stroke

According to customer requirements

Speed

Loaded 45m/min

Unloaded 90m/min

Acceleration

Loaded 0.5m/s²

Unloaded 3.0m/s²

Positioning Accuracy

±2mm