Several factors to consider when purchasing forks, hoping to be helpful. 1. Weight of goods to be handled Generally speaking, whether it is a telescopic fork or an internal combustion fork, the rated load capacity indicated represents its carrying capacity at standard height, so you only need to choose a fork that matches your actual goods weight, no need to deliberately choose a fork with a much larger rated load than the actual goods weight, which is a waste in equipment selection. 2. Height of stacking operation Commonly used counterbalanced telescopic forks and counterbalanced internal combustion forks, if the actual stacking height requirement is greater than the standard height, then it needs to be specified when purchasing, so that the factory can customize the suitable height according to the non-standard gantry, and the forks will have several standard models of lifting height for users to choose from.

　　Type of pallet used for goods When purchasing a fork, you must first pay attention to whether the existing pallet is a "double-sided pallet" or a "single-sided pallet", because if it is a "double-sided pallet", then choose a counterbalanced telescopic fork or a counterbalanced internal combustion fork, or a forward-moving telescopic fork, while the "fork-legged" telescopic stacking fork is only suitable for handling and stacking pallets with "single-sided pallets". Dust and noise reduction requirements of the working environment If the working environment has a lot of dust, it is recommended to choose a "high exhaust" counterbalanced internal combustion fork. If the working environment requires low noise, you can choose a telescopic fork series.

　　Clamp-type fork

　　Telescopic forks, as key equipment for logistics handling in the cold chain industry, play a very important role in the operation of the cold chain industry. Due to the special nature of the cold chain industry, the use of telescopic forks must consider their operating capacity in low-temperature environments: 1. Impact of low-temperature environment on battery capacity The battery capacity is calibrated based on an ambient temperature of 20℃ and standard atmospheric pressure. The lower the ambient temperature, the smaller the actual usable capacity of the battery. Generally speaking, in a low-temperature environment of -20℃, the actual capacity of the battery is only 80% of its rated capacity.

　　Therefore, telescopic forks that can meet the usage time requirements in a normal temperature environment may not meet the usage time requirements in a low-temperature environment, and the battery capacity needs to be appropriately increased. 2. Impact of temperature difference on telescopic forks In many cases, telescopic forks need to work alternately in low-temperature and normal-temperature environments. In this case, condensation is easily produced, which can damage electrical components. The design and maintenance of the fork must take this into account, otherwise the telescopic fork is likely to malfunction frequently and cannot be used normally. 3. Impact of humidity on the vehicle body Cold storage often has high humidity. Some parts and structural parts of the telescopic fork are easily rusted, which requires the telescopic fork to be properly protected to prevent serious rust or even damage.